|
|
辦公室 |
: |
04-7232105#8139 寶山校區教學大樓3F_339室 |
電話 |
: |
04-7232105#8115,8119 |
Email |
: |
chenmf@cc.ncue.edu.tw |
|
學歷 |
: |
德國Aachen工業大學 流體傳動與控制研究所 博士1991/09-1995/09
國立台灣工業技術學院 機研所 碩士 1987/09-1989/07
國立台灣工業技術學院 機械系 學士 1978/09-1982/07 |
經歷 |
: |
國立彰化師範大學 副校長 2012/08 ~迄今
國立彰化師範大學 工學院 院長 2008/08 ~2011/07
國立彰化師範大學 總務處 總務長 2005/08-2008/07
國立彰化師範大學 機電工程學系 系主任 2004/07-2005/10
國立彰化師範大學 機電工程學系 教授 1997/08 迄今
大葉大學 機械工程系 副教授 1995/10-1997/07
國立中山大學 機械工程系 講師 1989/09-1991/07
中科院一所 工程中心 研究助理 1985/10-1987/09
International Journal of Machine Tools and Manufacture, Journal Reviewer. |
研究領域 |
: |
精密機械設計
光電系統設計與量測
雷射系統設計開發與應用 |
期刊論文 |
: |
2016 |
3 |
Hsiao,Wen-Tse ;Yang,Chih-Chung ;Huang,Kuo-Cheng ; Chung,Chien-Kai ;Tseng,Shih-Feng ;Chiang,Donyau ; Chen,Ming-Fei ,"Optical Glass Substrates Forming Processes Using Pulsed Ultraviolet Laser Micromilling Technology ",JOURNAL OF LASER MICRO NANOENGINEERING,Vol.11 issue.1 pp.30-34 |
|
2016 |
3 |
Hsiao,Wen-Tse ;Yang,Chih-Chung ;Tseng,Shih-Feng ; Chiang,Donyau ;Huang,Kuo-Cheng ;Lin,Keh-Moh ; Chen,Ming-Fei,"Surface modification nanoporous titanium oxide films using continuous wave CO2 laser ",APPLIED PHYSICS A-MATERIALS SCIENCE |
|
2016 |
3 |
Ming-Fei Chen,Wen-Tse Hsiao,Ming-Cheng Wang,Ying-Fang Chen* ,"Isolation Scribing on Hybrid Films for CIGS-Based Solar Cell Using Various Nanosecond Pulsed Laser Wavelengths ",Journal of Laser Micro/Nanoengineering,Vol.11 Issue.2 pp.239-245 |
|
2015 |
3 |
Wen-Tse Hsiao, Shih-Feng Tseng, Chien-Kai Chung, Donyau Chiang, Kuo-Cheng Huang, Keh-Moh Lin, Liang-Yan Li, Ming-Fei Chen ,"Effect on structural, optical and electrical properties of aluminum-doped zinc oxide films using diode laser annealing ",OPTICS AND LASER TECHNOLOGY ,Vol .68 pp.41~47 |
|
2015 |
3 |
Dyi-Cheng Chen, Ming-Fei Chen, Ming-Ren Chen,"An Investigation into CIGS Thin-Films Solar Cell P2 Layer Scribing Depth and Width Using Different Laser Process Parameters ",ADVANCES IN MATERIALS SCIENCE AND ENGINEERING , Vol .2015 |
|
2015 |
3 |
Ming-Fei Chen,Wen-Tse Hsiao,Ming-Cheng Wang,Kai-Yu Yang,Ying-Fang Chen,"A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrate ",INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.81 lssue.9-12 pp.1723-1732 |
|
2014 |
3 |
Ming-Fei Chen, Dyi-Cheng Chen, Chung-Heng Yang, Shih-Feng Tseng,"The Identification of Nonlinear Systems Using C-(t)-K-(t) Plane Coordinates ",MATHEMATICAL PROBLEMS IN ENGINEERING, |
|
2014 |
3 |
Shih-Feng Tseng, Ming-Fei Chen, Wen-Tse Hsiao, Chien-Yao Huang, Chung-Heng Yang, Yu-Sheng Chen,"Laser micromilling of convex microfluidic channels onto glassy carbon for glass molding dies ",OPTICS AND LASERS IN ENGINEERING ,Vol . 57 pp. 58~63 |
|
2013 |
3 |
Shih-Feng Tseng, Wen-Tse Hsiao, Ming-Fei Chen, "The development of a portable line-shaping optical system for silicon surface treatment",OPTICAL REVIEW,Vol. 20, Issue 2, pp. 163-166 |
|
2013 |
SCI |
W. I. Hsiao, S. F. Tseng, C. K. Chung, K. C. Huang, M. F. Chen ,"Effects of macro- and micro-hole milling parameters on Al2O3 ceramics using an ultraviolet laser system ",(SCI) |
|
2013 |
3 |
Hsieh, Chia-Ting, Su, Wei-Chia , Huang, Chi-Yen , Hsu, Yu-Feng , Chung, Chia-Wei , Chen, Ming-Fei ,"Distortion aberration correction device fabricated with liquid crystal lens array",Optics Express,Vol. 21, Issue 2, pp. 1937-1943 |
|
2013 |
3 |
Wen-Tse Hsiao, Shih-Feng Tseng, Kuo-Cheng, Donyau Chiang, Ming-Fei Chen,"Microhole machining of silicon wafer in air and under deionized water by pulsed UV laser system ", APPLIED PHYSICS A-MATERIALS SCIENCE |
|
2013 |
3 |
Chin-Chia Liu , Ming-Fei Chen,"The Vibration Problem Studying in Micro Actuator System Using the Differential Transformation Method",Applications of Mathematics,284-287,1966-1970(SCI) |
|
2013 |
3 |
Wen-Tse Hsiao, Shih-Feng Tseng, Chien-Kai Chung, Pin-Hung Chen, Ming-Fei Chen, "Development of Portable Laser Machining System for Laser Writing Applications ",OPTICAL REVIEW,Vol. 20, Issue 2, pp. 167-172 |
|
2012 |
SCI |
Ming-Fei Chen, Keh-moh Lin, Yu-Sen Ho ,"Laser annealing process of ITO thin films using beam shaping technology",Optics and Lasers in Engineering ,50(3),491-495(SCI) |
|
2012 |
SCI |
Ming-Fei Chen,Shih-Feng Tseng, Wen-Tse Hsiao, Kuo-Cheng Huang, Donyau Chiang, Chang-Pin Chou ,"Edge isolation of transparent conductive polymer (TCP) thin films on flexible substrates using UV laser ablation ",Journal of Nanoscience and Nanotechnology,12(6),4905-4910(SCI) |
|
2011 |
SCI |
Ming-Fei Chen, Wei-Lun Huang ,"Study on the Aerodynamic Effect and Misalignment Influence of Journal Gas Bearing for High Speed Electro-spindle",Journal of the Chinese Society of Mechanical Engineers ,(SCI) |
|
2011 |
SCI |
Ming-Fei Chen, Wei-Lun Huang ,"Research on Reverse Engineering for Rotor-Bearing Systems Using The Finite Element Method ",Journal of the Chinese Society of Mechanical Engineers ,(SCI) |
|
2011 |
SCI |
Y. C. Lin, Z. Q. Lin; C. H. Shen; L Q. Wang; C. T. Ha; Chris Peng, 2011, Cu(In,Ga)Se2 films prepared by sputtering with a chalcopyrite Cu(In,Ga)Se2 quaternary alloy and In targets, Journal of Materials Science: Materials in Electronics, 23, p.493-500, (impact factor 1.020, cited No. = 4) |
|
2011 |
SCI |
Ming-Fei Chen,Shih-Feng Tseng, Kuo-Cheng Huang, Donyau Chiang, Sheng-Yi Hsiao, Yung-Sheng Lin, Chang-Pin Chou ,"Hydrophobic templates with rough patterns fabricated by laser micromachining for liquid droplets generation ",Advanced Materials Research ,264-265,1234-1239(SCI) |
|
2011 |
SCI |
Ming-Fei Chen,Wen-Tse Hsiao, Shih-Feng Tseng, Kuo-Cheng Huang, Yan-Hsin Wang ,"Pulsed Nd:YAG laser treatment of monocrystalline silicon substrate ",International Journal of Advanced Manufacturing Technology ,(SCI) |
|
2011 |
SCI |
Ming-Fei Chen, Keh-moh Lin, Yu-Sen Ho ,"Effects of Laser-induced Recovery Process on Conductive Property of SnO2F Thin Films ",Materials Science and Engineering B ,Vol.176 Issue.2 pp.127-131(SCI) |
|
2011 |
SCI |
Ming-Fei CHEN, Yu-Sen HO, Chien-Kai CHUNG, Wei-Lun HUANG, and Shen-Mao WANG,"Examination of the Developed Scanning System for RGB Laser Projector with a Feedback Control",Optical Review ,Vol. 18, No. 1 (2011) 1–4(SCI) |
|
2011 |
SCI |
Ming-Fei Chen, Wei-Lun Huang,"Investigation into the Finite Element Modeling and Dynamic Characteristics of the Assembly of Spindle and Motor Rotor " ,Journal of the Chinese Society of Mechanical Engineers ,32(3),257-266(SCI) |
|
2011 |
SCI |
Ming-Fei Chen, Yu-Sen Ho, Wen-Tse Hsiao, Tse-Hung Wu, Shih-Feng Tseng, Kuo-Cheng Huang,"Optimized laser cutting on light guide plates using grey relational analysis ",Optics and Lasers in Engineering, Vol. 49, Issue 2 pp. 222-228(SCI) |
|
2007 |
SCI |
Ming-Fei Chen, Yu-Pin Chen, "Compensating technique of field distorting error for the CO2 laser galvanometric scanning drilling machines", International Journal of Machine Tools and Manufacture, vol. 47, pp.1114-1124, 2007. (SCI) (NSC 94-2212-E-018-002 |
|
2006 |
EI |
Chen Ming-Fei, Hsiao Wen-Tse , Hu Chun-Wei, "Study on CAD/CAM Technology Applied for CO2 Laser Processing System", Advanced Design and Manufacturing for Sustainable Development. Australia and its State of New South Wales. Vol. 3, pp.525-528, 2006. (EI) (NSC 94-2212-E-018-002) |
|
2002 |
SCI |
Ming-Fei Chen, Yu-Pin Chen, Chen De. Lin, "Research on the Arc Type Aerostatic Bearing for a PCB Drilling Station", Tribology International, Vol. 35, pp.235-243, 2002 (SCI) |
|
2002 |
SCI |
Ming-Fei Chen, Yu-Ting Lin, "Dynamic Analysis of the X-shaped Groove Aerostatic Bearings With Disk-Spring Compensator", JSME International Journal, Series C, Vol. 45, No. 2, pp.492-501, 2002 (SCI) |
|
2002 |
EI |
Ming-Fei Chen, Yu-Ting Lin, "Dynamic Analysis of the X-shaped Groove Aerostatic Bearings With Non-linear Disk Spring Compensator", Journal of the Chinese Society of Mechanical Engineers, Vol.23, No.3, pp.271-280, 2002 (EI) |
|
2002 |
EI |
Ming-Fei Chen, Yu-Ting Lin, "Aerodynamic Effect of Grooved Rectangular Aerostatic Bearing on a Slideway", Journal of the Chinese Society of Mechanical Engineers, 2002, Vol.23, No.5, pp.459-466, 2002 (EI) |
|
2002 |
SCI |
Ming-Fei Chen, Yu-Ting Lin, "Static behaviors and dynamic stability analysis of grooved rectangular aerostatic thrust bearings by modified resistance network method", Tribology International, Vol. 35, pp.329-338, 2002 (SCI) (NSC-89-2212-E018-003) |
|
1991 |
EI |
M.F.Chen, C.B. Lee, "Performance Analysis of a Pressure-Compensated Axial Piston Pump", Journal of the Chinese Society of Mechanical Engineers, Vol. 12, No.5,1991 (EI) |
| |
國際研討會論文 |
: |
2008 |
2 |
Ming-Fei Chen, Kuo-Cheng Huang, Yu-Pin Chen, Wen-Tse Hsiao, Yu-Sen Ho, Shih-Feng Tseng, "Study on Fabrication of Taper Microvias for Aluminum Alloy using UV Laser", The Eightth Asia-Pacific Conference on Materials Processing (8th APCMP, 2008). |
|
2008 |
2 |
Ming-Fei Chen, Kuo-Cheng Huang, Yu-Pin Chen, Wen-Tse Hsiao, Yu-Sen Ho, Shih-Feng Tseng, "Investigation of laser micro-drilling for silicon wafer substrate", The Eightth Asia-Pacific Conference on Materials Processing (8th APCMP, 2008). |
|
2008 |
2 |
Ming-Fei Chen, Yu-Pin Chen, Wei-Levn Huang, Wen-Tse Hsiao, Yu-Sen Ho, "Laser cutting of GFRM using assistance cooling-air generated by Vortex tube", The Eightth Asia-Pacific Conference on Materials Processing (8th APCMP, 2008). |
|
2008 |
EI |
Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, "Development of CO2 laser drilling machine for microvias formation of the HDI printed circuit boards.", SPIE International Conference High-Power Laser Ablation VII, 2008. (EI) |
|
2008 |
2 |
M.F. Chen, Y.S. Ho, W.T. Hsiao, Y.T Chen, S.M. Wang, S.W. Xu, C.W. Hu, "Fabrication and Design of Galvanometric Scanner For Laser Projector", 6 th International Conference on Optics-photonics Design |
|
2008 |
2 |
Ming-Fei Chen, Wen-Tse Hsiao, Yu-Sen Ho, Yu-Pin Chen, "Laser beam shaping technique applied for patterning on indium tin oxide thin films of glass/plastic substrate", 2nd International Symposium on Transparent Conductive Oxides ,Greece, 2008.(Abstract Accepted) |
|
2008 |
2 |
Ming-Fei Chen, Wen-Tse Hsiao, Yu-Sen Ho, Yu-Pin Chen, "Analysis and experimental of temperature distribution and thermal effect on transparent conductive oxide thin films ablated by UV laser", 2nd International Symposium on Transparent Conductive Oxides ,Greece, 2008.(Abstract Accepted) |
|
2007 |
2 |
Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, Zhi-Peng Gu, "Laser patterning Indium Tin Oxide thin films on glass substrate", The Asia Pacific Conference on Optics Manufacture 2007, no.074TW, Hong Kong, 2007. |
|
2007 |
2 |
Shih-Feng Tseng, Kuo-Cheng Huang, Ming-Fei Chen, Wen-Tse Hsiao," Development of a Rapid Prototyping Technique for Aspherical Optical Components", Automation 2007 The Ninth International Conference on Automation Technology, Taipei, Taiwan, 2007. |
|
2007 |
2 |
Ming Fei Chen, I-Feng Li, Chun-Wei Hu, "The Driver Circuit and Focusing Lens Designed for the Laser Range-Finder", The Asia Pacific Conference on Optics Manufacture 2007, no.038TW, Hong Kong, 2007. |
|
2007 |
EI |
Ming-Fei Chen, Kuo-Cheng Huang, Yu-Pin Chen, Chun-Wei Hu, "Analysis of Optical System for Two-Wavelength Laser Range Finder", SPIE International Conference, 2007. (EI) |
|
2007 |
2 |
Ming-Fei Chen, Yu-Pin Chen, Chun-Wei Hu, Chien-Chuan Chen, "Design of the Singlet F-theta Scan Lens for Laser Drilling", The Asia Pacific Conference on Optics Manufacture 2007, no.133TW, Hong Kong, 2007. |
|
2006 |
2 |
Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, Zhi-Peng Gu, "Laser direct write patterning technique of indium tin oxide film", The 1st International Symposium on Transparent Conducting Oxides, Greece, 2006. |
|
2006 |
EI |
Ming-Fei Chen, Wen-Tse Hsiao, Chun-Wei Hu, "Study on CAD/CAM technology applied for CO2 laser processing system", The 7 th International Conference on Frontiers of Design and Manufacturing (ICFDM' 2006), 2006. (EI) |
|
2006 |
EI |
Ming-Fei Chen, Yu-Pin Chen, Wen-Tse Hsiao, "Tool path generation for 2D profiles in CO2 laser machine system", International Technology |
|
2005 |
EI |
Ming-Fei Chen, Yu-Pin Chen, "UV Laser Micromachining in Silicon Material for Micro-mechanical Systems", The International Conference on MEMS, NANO and Smart Systems, 2005. (EI) |
|
2005 |
2 |
Ming-Fei Chen, Wei-Lven Huang, Lan-Qiao Zhan, "Experimental study on cooling-air generator by vortex tube", 4th Asia-Pacific Forum on Precision Surface Finishing and Deburring Technology, 2005. |
|
2005 |
EI |
Ming-Fei Chen, Yu-Pin Chen, "New technology of the materials process:microvia with CO2 laser drilling machine", Laser-Based Micro-Packaging II, part of the SPIE International Symposium on Lasers and Applications in Science and Engineering (LASE), 2005. (EI) |
| |
國內研討會論文 |
: |
2008 |
|
陳明飛,張宏瑋,"雷射加工應用於鋁料之溫度熱分析影響",2008 ISC 智慧型系統工程應用研討會,2008 |
|
2008 |
|
陳明飛,吳澤宏,"CO2 雷射切割光學塑膠PMMA 之切割特性分析",2008 ISC 智慧型系統工程應用研討會,2008 |
|
2008 |
|
陳明飛,林廉逸,"多語言方法應用於數位影像處理之研究",2008 ISC 智慧型系統工程應用研討會,2008 |
|
2008 |
|
陳明飛,陳林毅,"CO2雷射標印圖像品質評估之研究",2008 ISC 智慧型系統工程應用研討會,2008 |
|
2008 |
|
陳明飛,李俊賢,黃韋倫和蔡秉璁,“高速氣體靜壓軸承-主軸系統動態特性分析與實驗研究“,第十六屆中華民國振動與噪音工程學術研討會,2008 |
|
2008 |
|
陳明飛,蔡秉璁和黃韋倫,“高速主軸馬達轉子裝配方式之特性與有限元素建模研究“,第十六屆中華民國振動與噪音工程學術研討會,2008 |
|
2007 |
|
杜順旭, 陳明飛, 黃韋倫, 蔡秉璁, 李俊賢, "硬碟懸臂結構在隨機振動環境下的隔振研究", 第十六屆國防科技學術研討會, 2007. |
|
2007 |
|
陳明飛, 李俊賢, 蔡秉璁, 潘志軒, 張褚峰, "硬碟懸臂結構在簡諧振動環境下的隔振設計與分析", 第十六屆國防科技學術研討會, 2007. |
|
2007 |
|
陳明飛, 黃韋倫, 蔡秉璁, 張褚峰, 潘志軒, "基於有限元模型的轉子系統逆向工程研究", 31屆全國力學會議, 2007. |
|
2007 |
|
陳明飛, 古志鵬, 陳林毅, "修正峰值訊號雜訊比法於雷射標印系統影像品質評估之應用", 2007台灣光電科技研討會, 2007. |
|
2007 |
|
陳明飛, 孫慶豪, 張宏瑋, "雷射鑽孔技術於玻璃脆性材料之溫度場分析", 2007台灣光電科技研討會, 2007. |
|
2007 |
|
陳明飛, 巫建億, 林廉逸, "聚合物材料雷射切割之加工路徑模擬與規劃", 2007台灣光電科技研討會, 2007. |
|
2006 |
|
Ming-Fei Chen, I-Feng Li, Chun-Wei Hu, "Synchronizing Phase Applied to Phase-Shift Laser Range-finder", 2006 Conference on Microelectronics Technologyand Applications, no.E18, 2006. |
|
2006 |
|
Wen-Tse Hsiao, Chun-Wei Hu, Ming-Fei Chen, "Application of Laser Scanning Marking System with Image Processing Technique", The 4th Conference on Precision Machinery and Manufacturing Technology, no.132,2006. |
|
2006 |
|
Ming-Fei Chen, Yu-Pin Chen, Chun-Wei Hu, Ching-Hao Sun, "Analysis of Applying Laser Marking on Brittle Curved Surface Material", The 14th Automation Technology Conference, no. P22, 2006. |
|
2006 |
|
陳明飛, 吳士元, 李俊賢, "點陣式雷射打標系統之研製", The 14th Automation Technology Conference, no. P25, 2006. |
|
2006 |
|
杜順旭, 陳明飛, 李俊賢, 蔡秉璁, 賴緯晏, "小型環狀鋼絲繩隔振器之研製",中華民國振動與噪音工程學會九十五年年會暨第十四屆學術研討會, no. 74, 2006. |
|
2006 |
|
陳明飛, 李禕峰, 胡峻瑋, 陳昱村, "簡易型鎖相迴路在相位式雷射測距之應用", AOI Forum, 2006. |
|
2006 |
|
陳明飛, 陳育斌, 蕭文澤, 古志鵬, "ITO薄膜雷射直寫圖案化製程技術", 2006能源與光電薄膜科技研討會暨國會專題研究成果發表會, no. D34, 2006. |
|
2006 |
|
杜順旭, 陳明飛, 李俊賢, 賴緯晏, 蔡秉璁, "電子設備在簡譜振動環境下的隔振設計", The 23rd National conference on mechanical Engineering, no. C3-006, 2006. |
|
2006 |
|
陳明飛, 孫慶豪, "雷射雕刻技術於脆性材料之溫度場影響", The 23rd National conference on mechanical Engineering, no. E12-002, 2006. |
|
2006 |
|
杜順旭, 陳明飛, 詹嵐喬, 李俊賢, 許慶緯, "氣體靜壓主軸模態分析與實驗研究", The 23rd National conference on mechanical Engineering, no. C5-003, 2006. |
|
2006 |
|
陳明飛, 巫建億, "CAD/CAM整合技術於雷射加工機之應用", 2006智慧生活研討會, 2006. |
|
2005 |
|
杜順旭, 陳明飛, 吳士元, 詹嵐喬, "12吋晶圓承載盒之模態測試與有限元素分析", 13th中華民國振動與噪音工程學會, 2005. |
|
2005 |
|
杜順旭, 陳明飛, 詹嵐喬, 吳士元, "12吋晶圓模態測試及有限元素分析", 13th中華民國振動與噪音工程學會, 2005. |
|
2005 |
|
陳明飛, 詹嵐喬, "精密天平氣靜壓主軸性能分析與實驗研究", The 22nd National conference on mechanical Engineering, 2005. |
|
2005 |
|
許釋文, 陳育斌, 詹嵐喬, 陳明飛, "雷射加工機CAD/CAM轉檔技術研究", The 22nd National conference on mechanical Engineering, 2005. |
|
2005 |
|
李俊賢, 陳明飛, 林志宏, 李祐昌, 陳新凱, "矩形流道噴嘴之渦流管實驗研究", Energy Refrigeration Air-Condition Conference, 2005. |
|
2005 |
|
杜順旭, 陳明飛, 黃韋倫, 詹嵐喬, "硬碟鋼絲繩隔振器靜動態特性實驗研究",中華民國機構與機器原理學會8th, 2005. |
|
2005 |
|
陳明飛, 李逸華, "影像處理技術於精密加工機定位之應用", AOI Forum |
|
2005 |
|
陳建銓, 胡峻瑋, 陳明飛, "雷射加工系統之單片式f-θ聚焦透鏡研究", The 22nd National conference on mechanical Engineering, 2005. |
|
2005 |
|
陳明飛, 李逸華, "影像處理應用於印刷電路板之瑕疵檢測", AOI Forum |
|
2005 |
|
陳明飛, 李禕峰, 胡峻瑋, "雷射二極體驅動電路與聚焦鏡片設計", AOI Forum |
|
2005 |
|
Chun-Wei Hu, Ming-Fei Chen, "Evaluation and Analysis of Absorption for Engineering Materials in Laser Processing System", Optics and Photonics Taiwan 2005 (OPT 2005), no. PC-FR2-06, Tainan, Taiwan , 2005(12). |
|
2004 |
|
陳明飛, 何友森, 蕭文澤, "晶圓貼合機之視覺自動對準系統", 13th自動化科技研討會, 2004. |
|
2004 |
|
蕭偉佑, 蕭文澤, 陳明飛, "線性馬達進給系統定位誤差補償暨角度誤差量測",第一屆磨潤暨材料科技研討會, 2004. |
|
2004 |
|
陳明飛, 陳建銓, "ZEMAX光學軟體在Celor lens成像品質分析與製造公差之研究", The 21st National conference on mechanical Engineering, 2004. |
|
2004 |
|
陳明飛, 陳建銓, 林偉生, "利用三片式透鏡組合設計130萬畫素手機相機鏡頭", The 1st Applied Science and Technology Conference, 2004. |
|
2004 |
|
陳明飛, 陳建銓, 黃國政, 郭慶祥, "設計CO2雷射用f-θ聚焦透鏡", Optics and Photonics Taiwan, 2004. |
|
2004 |
|
陳明飛, 蕭偉佑, 蕭文澤, 洪世欣, "線性馬達平台定位精度及誤差補償", The 13th Automation Technology nference, 2004. |
|
2004 |
|
陳明飛, 黃天勇, 李禕峰, "鎖相迴路技術應用於相位式雷射量測電路", AOI Forum |
|
2004 |
|
陳明飛, 黃天勇, 塗吉鎮, "利用CPLD設計相位式雷射測距的邏輯電路", The 1st Applied Science and Technology Conference, 2004. |
|
2004 |
|
陳明飛, 黃天勇, 李恩杰, "偵測距離之訊號分析及電路設計技術", AOI Forum |
|
2004 |
|
陳明飛, 許釋文, 邱志豪, "高密度電路板CO2雷射微孔成型技術", The 21th National conference on mechanical Engineering, 2004. |
|
2004 |
|
陳明飛, 陳育斌, 許釋文, "高密度電路板CO2雷射加工機台光路設計", Optics and Photonics Taiwan, 2004. |
|
2004 |
|
陳明飛, 詹嵐喬, 李俊賢, 張東堯, 洪國志, "航空用硬碟鋼絲繩隔振器試驗研究", The 21st National conference on mechanical Engineering, 2004. |
|
2003 |
|
蕭文澤, 陳金安, 詹嵐喬, 陳明飛, 方思巽, "PCB鑽孔機氣體靜壓主軸雙向止推軸承性能分析", 20th中國機械工程學會, 2003. |
|
2003 |
|
陳明飛, 何友森, "影像處理技術在真空吸附之印刷電路板自動對準系統之研究", 20th中國機械工程研討會, 2003. |
|
2002 |
|
陳明飛, 林育廷, 林育全, "氣體靜壓軸承與導軌系統靜動態特性分析 第一部份:方形氣靜壓軸承靜動態特性分析", The 19th National conference on mechanical Engineering, 2002. |
|
2002 |
|
陳明飛, 林育廷, "氣體靜壓軸承與導軌系統靜動態特性分析 第二部份:氣靜壓線性導軌系統動態特性分析", The 19th National conference on mechanical Engineering, 2002. |
|
2002 |
|
陳明飛, 林育廷, 方思巽, 陳金安, "高速主軸之氣靜壓止推軸承性能分析", The 19th National conference on mechanical Engineering, 2002. |
|
2002 |
|
陳明飛, 曾釋鋒, 陳金安, 謝銘雄, "高速氣靜壓主軸止推軸承動態特性分析", The 19th National conference on mechanical Engineering, 2002. |
|
2002 |
|
陳明飛, 洪世欣, "PCB鑽孔機之弧形氣靜壓軸承靜態特性分析", The 19th National conference on mechanical Engineering,2002. |
|
2001 |
|
陳明飛,林育廷,"高速進給對具配流槽氣靜壓軸承特性分析",The 18 th National conference on mechanical Engineering,2001. |
|
2001 |
|
陳明飛,鄭文宗,"PCB 鑽孔機 Y 軸氣靜壓導軌精度系統鑑別",The 18 th National conference on mechanical Engineering,2001. |
|
2001 |
|
陳明飛,林育全,林育廷,"氣靜壓平台動態特性分析",The 18 th National conference on mechanical Engineering,2001. |
|
2001 |
|
陳明飛,曾釋鋒,林育廷,"階梯扇形止推動壓軸承性能分析",The 18 th National conference on mechanical Engineering,2001. |
|
2000 |
|
陳明飛,劉彬炫,林育廷,"具補償氣體軸承穩定性分析",The 25 th conference on theoretical and applied mechanics,Taiwan, R.O.C. |
|
2000 |
|
陳明飛,林育廷,林育全,"高速進給與軸承設計參數對氣靜壓軸承動態響應之影響",The 25 th conference on theoretical and applied mechanics,Taiwan, R.O.C. |
|
2000 |
|
方思巽,陳政雄,陳育斌,陳明飛,"氣靜壓主軸徑向軸承靜動態特性分析與性能測試",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
陳明飛,林承德,"PCB 鑽孔機 X 軸氣靜壓導軌精度特性之研究",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
陳明飛,林育廷,"具 X 型配流槽氣靜壓軸承性能分析與應用",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
陳明飛,陳金安,"CNC 龍門加工機主軸迴轉精度測試與動態性能分析",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
黃韋倫,陳明飛,陳育斌,"精密磨床液靜壓徑向軸承動壓效應之研究",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
王彥欣,陳明飛,"氣靜壓主軸止推軸承設計與性能分析",The 17 th National conference on mechanical Engineering,2000. |
|
2000 |
|
陳明飛,林承德,"氣靜壓平台設計,製作與測試",製造科技領域技術論文,2000. |
|
2000 |
|
陳明飛,劉彬炫,"具補償之氣靜壓軸承設計與分析",The 17 th National conference on mechanical Engineering,2000. |
|
1999 |
|
陳明飛,吳政憲,謝銘雄,"PCB 鑽孔機精密定位平台性能分析",The 16 th National conference on mechanical Engineering,1999. |
|
1999 |
|
陳明飛,陳錫輝,王彥欣,"具配流槽之氣靜壓軸墊性能分析與實驗研究",The 16 th National conference on mechanical Engineering,1999. |
|
1999 |
|
陳明飛,葉哲成,陳錫輝,"PCB 成型機內藏式主軸模態分析與實驗研究",The 16 th National conference on mechanical Engineering,1999. |
|
1999 |
|
陳明飛,林承德,王彥欣,"PCB 鑽孔機剛結構床台動態分析",The 16 th National conference on mechanical Engineering,1999. |
|
1999 |
|
陳明飛,吳政憲,謝銘雄,"PCB 鑽孔機氣靜壓導軌系統暫態性能分析與實驗研究",The 16 th National conference on mechanical Engineering,1999. |
|
1999 |
|
陳明飛,吳政憲,謝銘雄,"PCB 鑽孔機氣靜壓導軌之模態分析與動態性能測試",The 16 th National conference on mechanical Engineering,1999. |
|
1998 |
|
陳明飛,陳育斌,謝銘雄,"量測儀器多孔質氣靜壓性能分析與實驗研究",The 15 th National conference on mechanical Engineering,1998. |
|
1998 |
|
陳明飛,黃韋倫,陳育斌,"氣靜壓平面軸承動態性能分析與實驗研究",The 15 th National conference on mechanical Engineering,1998. |
|
1998 |
|
陳明飛,蘇啟宗,陳育斌,"氣靜壓徑向軸承動態性能分析",The 15 th National conference on mechanical Engineering,1998. |
|
1997 |
|
陳明飛,蘇啟宗,黃韋倫,"精密磨床液靜壓軸承性能分析",The 14 th National conference on mechanical Engineering,1997. |
| |
專利 |
: |
AIRLIFT PISTON MECHANISM United States Patent Patent No.: US 6616426B1 Date of Patent: Sep. 9, 2003 Inventors: Chi-Wang Liang, Ming-Fei Chen Appl. No.: 10/107167 Filed: Mar. 28, 2002 |
|
ENERGY SAVING TYPE VIBRATION DEVICE FOR CELLULAR PHONE United States Patent Patent No.: US 2004/0203530 A1 Pub. Date: Oct. 14, 2004 Inventors: Chi-Wang Liang, Chung Heng Yang, Ming-Fei Chen Appl. No.: 10/340252 Filed: Jan. 9, 2003 |
|
公告/公開號 00431392 專利類型 新型 專利名稱 可調整緩震阻尼力避震器之結構改良 公告/公開日期 2001/04/21 證書號 172597 公報卷期 2812 申請日期 2000/02/03 申請案號 089202088 國際分類號 B62K-025/04; F16F-009/00 發明人/地址/國家 林建相 陳明飛 申請人/地址/國家 林建相 陳明飛 |
|
公告/公開號 00435628 專利類型 新型 專利名稱 具有補償元件構造之氣靜壓線性滑軌 公告/公開日期 2001/05/11 證書號 174734 公報卷期 2814 申請日期 2000/09/01 申請案號 089215174 國際分類號 F16C-029/04 發明人/地址/國家 陳明飛 申請人/地址/國家 陳明飛 |
|
公告/公開號 00452029 專利類型 新型 專利名稱 氣靜壓線性滑軌元件 公告/公開日期 2001/08/21 公報卷期 2824 申請日期 2000/08/24 申請案號 089214616 國際分類號 F16H-055/32 發明人/地址/國家 陳明飛 申請人/地址/國家 陳明飛 |
|
公告/公開號 00466980 專利類型 新型 專利名稱 氣壓驅動之氣靜壓主軸構造 公告/公開日期 2001/12/01 公報卷期 2834 申請日期 2000/06/19 申請案號 089210454 國際分類號 B2Q-011/12 發明人/地址/國家 陳明飛 申請人/地址/國家 陳明飛 |
|
公告/公開號 00482289 專利類型 新型 專利名稱 液體溫度控制系統 公告/公開日期 2002/04/01 公報卷期 2910 申請日期 2001/09/14 申請案號 090215875 國際分類號 F28D-015/06 發明人/地址/國家 陳明飛 申請人/地址/國家 裕祥精機工業股份有限公司 |
|
公告/公開號 M253985 專利類型 新型 專利名稱 端子壓合機構 公告/公開日期 2004/12/21 公報卷期 3136 申請日期 2003/12/31 申請案號 092223115 國際分類號 H01R-043/00 發明人/地址/國家 陳明飛 林永昌 申請人/地址/國家 秀強企業股份有限公司 |
|
公告/公開號 200517799 專利類型 發明 專利名稱 渦流管=[pubdt] 公告/公開日期 2005/06/01 公報卷期 0311 申請日期 0921128 申請案號 092133629 國際分類號 G05D-023/00 ; F15C-001/16 發明人/地址/國家 梁吉旺 ; 陳明飛 ; 陳育斌 ; 徐世威 申請人/地址/國家 梁吉旺 陳明飛 |
|
公告/公開號 00486560 專利類型 發明 專利名稱 熱交換器 公告/公開日期 2002/05/11 公報卷期 2914 申請日期 2001/10/18 申請案號 090125757 國際分類號 F28F-009/26 發明人/地址/國家 陳明飛 申請人/地址/國家 裕祥精機工業股份有限公司 |
|
公告/公開號 00573713 專利類型 新型 專利名稱 氣浮式活塞機構 公告/公開日期 2004/01/21 公報卷期 3103 申請日期 2001/12/31 申請案號 090223719 國際分類號 F16J-001/10 發明人/地址/國家 陳明飛 申請人/地址/國家 陳明飛 梁吉旺 |
|
公告/公開號 00539342 專利類型 新型 專利名稱 鼠籠式轉子 公告/公開日期 2003/06/21 公報卷期 3018 申請日期 2002/03/22 申請案號 091203575 國際分類號 H02K-001/06 發明人/地址/國家 梁吉旺 陳明飛 林洽芳 申請人/地址/國家 閤興科技股份有限公司 |
|
公告/公開號 I234697 專利類型 發明 專利名稱 渦流管 公告/公開日期 2005/06/21 公報卷期 3218 申請日期 0921128 申請案號 092133629 國際分類號 G05D-023/00 ; F15C-001/16 發明人/地址/國家 梁吉旺 ; 陳明飛 ;陳育斌 ; 徐世威 申請人/地址/國家 梁吉旺 ; 陳明飛 |
|
公告/公開號 200520917 專利類型 發明 專利名稱 板件切割裝置 =[pubdt] 公告/公開日期 2005/07/01 公報卷期 0313 申請日期 2003/12/25 申請案號 092136923 國際分類號 B26D-005/02; B23K-026/14 發明人/地址/國家 陳明飛 陳育斌 申請人/地址/國家 梁吉旺 陳明飛 |
|
公告/公開號 I241233 專利類型 發明 專利名稱 板件崩裂裝置 公告/公開日期 2005/10/11 公報卷期 3229 申請日期 2005/02/02 申請案號 094103272 國際分類號 B26F-003/00 發明人/地址/國家 陳明飛 陳育斌 申請人/地址/國家 梁吉旺 陳明飛 |
|
公告/公開號 200628417 專利類型 發明 專利名稱 板件崩裂裝置 公告/公開日期 2006/08/16 公報卷期 0416 申請日期 2005/02/02 申請案號 094103272 國際分類號 C03B-033/033 發明人/地址/國家 陳明飛 陳育斌 申請人/地址/國家 梁吉旺 陳明飛 |
|
公告/公開號 I261095 專利類型 發明 專利名稱 鋼絲繩隔振器 公告/公開日期 2006/09/01 公報卷期 3325 申請日期 2005/11/18 申請案號 094140691 國際分類號 F16F-015/0607 發明人/地址/國家 陳明飛 黃韋倫 詹嵐喬 杜順旭 鍾紹蔚 吳登淵 申請人/地址/國家 財團法人工業技術研究院 INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE |
|
公告/公開號 I272256 專利類型 發明 專利名稱 板件崩裂裝置 公告/公開日期 2007/02/01 公報卷期 3404 申請日期 2005/02/02 申請案號 094103273 國際分類號 C03B-033/033(2006.01) 發明人/地址/國家 陳明飛 陳育斌 申請人/地址/國家 梁吉旺 陳明飛 |
|
公開(公告)號 CN2502211 名稱 熱交換器 公開(公告)日 2002.07.24 申請日 2001.10.29 申請(專利)號 CN01266136.8 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 陳明飛 申請(專利權)人 裕祥精機工業股份有限公司 |
|
公開(公告)號 CN2519060 名稱 氣浮式活塞機構 公開(公告)日 2002.10.30 申請日 2002.01.11 申請(專利)號 CN02201338.5 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 陳明飛;梁吉旺 申請(專利權)人 梁吉旺;陳明飛 |
|
公開(公告)號 CN2533609 名稱 鼠籠式轉子 公開(公告)日 2003.01.29 申請日 2002.04.03 申請(專利)號 CN02230329.4 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 梁吉旺;陳明飛;林洽芳 申請(專利權)人 閤興科技股份有限公司 |
|
公開(公告)號 CN1516326 名稱 省電型手機振動裝置 公開(公告)日 2004.07.28 申請日 2003.01.07 申請(專利)號 CN03100081.9 專利代理機構 北京三友知識產權代理有限公司 發明(設計)人 梁吉旺;楊忠衡;陳明飛 申請(專利權)人 總格實業股份有限公司;楊忠衡;陳明飛 |
|
公開(公告)號 CN2687583 名稱 渦流管 公開(公告)日 2005.03.23 申請日 2003.12.12 申請(專利)號 CN200320127613.9 專利代理機構 北京紀凱知識產權代理有限公司 發明(設計)人 陳明飛;梁吉旺;陳育斌;徐世威 申請(專利權)人 陳明飛;梁吉旺 |
|
公開(公告)號 CN2700043 名稱 板件切割裝置 公開(公告)日 2005.05.18 申請日 2004.01.05 申請(專利)號 CN200420001898.6 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 陳明飛;陳育斌 申請(專利權)人 梁吉旺;陳明飛 |
|
公開(公告)號 CN1626990 名稱 渦流管 公開(公告)日 2005.06.15 申請日 2003.12.12 申請(專利)號 CN200310117391.7 專利代理機構 北京紀凱知識產權代理有限公司 發明(設計)人 陳明飛;梁吉旺;陳育斌;徐世威 申請(專利權)人 梁吉旺;陳明飛 |
|
公開(公告)號 CN2700043 名稱 板件切割裝置 公開(公告)日 2005.05.18 申請日 2004.01.05 申請(專利)號 CN200420001898.6 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 陳明飛;陳育斌 申請(專利權)人 梁吉旺;陳明飛 |
|
公開(公告)號 CN2765747 名稱 板件崩裂裝置 公開(公告)日 2006.03.22 申請日 2005.02.16 申請(專利)號 CN200520004116.9 專利代理機構 中科專利商標代理有限責任公司 發明(設計)人 陳明飛;陳育斌 申請(專利權)人 梁吉旺;陳明飛 |
|
|
|