|
|
| Email |
： |
ychuang@cc.ncue.edu.tw |
|
| 學歷 |
： |
美國哥倫比亞大學 機械工程 博士 Ph. D 1992/9-1996/2
美國哥倫比亞大學 機械工程 M.of Ph. 1992/9-1994/6
國立中央大學 機械工程所 碩士 1988/9-1990/6
國立中央大學 機械工程系 學士 1984/9-1988/6
台北市建國中學 1981/9-1984/6
台北市介壽國中 1978/9-1981/6
台北市敦化國小 1972/9-1978/6
|
| 經歷 |
： |
國立彰化師範大學 機電工程學系 教授 2004/ 08~
國立彰化師範大學 工學院 院長 2011/08~2014/07
國立彰化師範大學 研究發展處 研發長 2007/08~2011/07
國立彰化師範大學 機電工程學系 系主任 2005/10/~2007/09
國立彰化師範大學 顯示技術研究所 所長 2005/10/~2007/09
國立彰化師範大學 機電工程學系 副教授 2001/08~2004/07
國立彰化師範大學 工業教育學系機械設計組 副教授 1997/08-2001/7
大葉大學 機械工程學系 兼任副教授 1996/2-2001/01
彰化縣消防局 火災鑑定委員會 委員 2002 /01~now
彰化縣 研究與發展委員會 委員 2010 /01~now
經濟部 智慧財產局 兼任專利審查委員 2002/03~2006/12
美國明尼蘇達大學 訪問學者 2002/06~2002/09
臺灣飛利浦股份有限公司 園區分公司 設備暨自動化部 資深工程師 1996/08~1997/07
|
| 研究領域 |
： |
自動控制
機電控制系統
機械運動進給平臺健康診斷
微位移平臺設計與控制
|
| 期刊論文 |
： |
| 2013 |
EI |
Yi-Cheng Huang, Yu-Shi Chen, Shi-Lun Sun and Kuan-Heng Peng, “Prognostic Diagnosis of Hollow Ball Screw Pretension on Preload Loss through Sensed Vibration Signals”, Vol. 234, 959-966, Lecture Notes in Electrical Engineering, 2013. |
 |
| 2013 |
SCI |
Yi-Cheng Huang and Ying-Hao Li, “Improved Particle Swarm Optimization by Updating Constraints Technique for PID Control of a Real Time Linear Motor Positioning,” accepted by the Journal of Intelligent Automation and Soft Computing, 2013. |
|
| 2013 |
SCI |
Yi-Cheng Lin, Xiang-Yu Peng , Li-Ching Wang, Yao-Leng Lin, Cheng-Han Wu, Shih-Chang Liang, Residual stress in CIGS thin film solar cells on polyimide:simulation and experiments, J Mater Sci: Mater Electron, DOI 10.1007/s10854-013-1610-7(I.F.=1.966) |
|
| 2013 |
SCI |
Yi-Cheng Huang and Ying-Hao Li, “Experiments of Iterative Learning Control System Using Particle Swarm Optimization by New Bounded Constraints on Velocity and Positioning,” accepted by Engineering Computations, 2013. |
|
| 2013 |
EI |
Yi-Chang Huang, Guan-Zhang Ding, Bo-Hsuan Chen and Yu-Ray Huang, “Simulation and Experiment of Langevin Type Piezoelectric Ultrasonic Horn for Micro Tool Motion”, Vol. 234, pp. 967-974, Lecture Notes in Electrical Engineering, 2013. |
|
| 2012 |
EI |
Yi-Cheng Huang and Kun-Yang Li, “Numerical Simulation and Experimental Study on Bonding Tool Design of Thermosonic Transducer for Flip Chip Bonding,” Journal of Applied Mechanics and Materials, Vols. 157-158, Mechatronics and Applied Mechanics, pp.1670-1673, Feb., 2012. |
|
| 2011 |
SCI |
Y. C. Lin,, J. H. Ke, W. T. Yen, S. C. Liang, C. H. Wu ,and C. T. Chiang, 2011, Preparation and characterization of Cu(In,Ga)(Se,S)2 films without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3 targets, Applied Surface Science, 257, p.4278-4284. (impact factor 2.103, cited No. = 21) |
|
| 2010 |
SCI |
Kuan-Jung Chung, and J. B. Bernstein,” Experimental Investigation of the Optimal Laser-Induced Microbridges, “ Precision Engineering, Vol.34, No. 3, pp. 578-585, Jul. 2010. (IF: 1.393, Ranking: 10/39 of Engineering, Manufacturing subject by 2012 JCR, 5-year IF: 1.782.) |
|
| 2010 |
SCI |
C.-J. Tong, Y.-C. Cheng, M.-T. Lin, Kuan-Jung Chung, J.-S. Hsu, and C.-L. Wu, " Optical Micro-peddle Beam Deflection Measurement for electrostatic mechanical testing of Nano-scale Thin Film Application to MEMS,” Microsystem Technologies, Vol.16, No.7, pp.1131-1137, Jul. 2010. (IF: 0.827, Ranking: 152/242 of Engineering, Electrical, and Electronic subject by 2012 JCR, 5-year IF: 0.900.) |
| |
| 國際研討會論文 |
： |
| 2012 |
EI |
Yi-Cheng Huang and Yan-Chen Shin, “Method of Intelligent Fault Diagnosis of Preload Loss for Single Nut Ball Screws through the Sensed Vibration Signals,” International Conference on Machine Learning and Data Analysis, World Academy of Science, Engineering and Technology, Issue 65, pp. 1394-1401, Tokyo, Japan, May 29-30, 2012. |
|
| 2012 |
2 |
Yi-Cheng Huang, Yu-Shi Chen, Shi-Lun Sun and Kuan-Heng Peng, “Prognostic Diagnosis of Hollow Ball Screw Pretension on Preload Loss through Sensed Vibration Signals”, International Conference on Intelligent Technologies and Engineering Systems, Dec. 12-15, Changhua, Taiwan, 2012. |
|
| 2012 |
2 |
Shu-Ting Li, Jen-Ai Chao, Yi-Hao Li and Yi-Cheng Huang, “Design the Bandwidth of Zero Phase Filter of Iterative Learning Controller by Improved Particle Swarm Optimization”, International Conference on Intelligent Technologies and Engineering Systems, Dec. 12-15, Changhua, Taiwan, 2012. |
|
| 2011 |
EI |
Yi-Cheng Huang and Kun-Yang Li, “Numerical Simulation and Experimental Study on Bonding Tool Design of Thermosonic Transducer for Flip Chip Bonding,” International Conference on Mechatronics and Applied Mechanics, Hong Kong, Dec. 27-28, 2011. |
|
| 2011 |
EI |
Yi-Cheng Huang and Fong-You Lee “Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor,” International Conference on Mechatronics and Applied Mechanics, Hong Kong, Dec. 27-28, 2011. |
|
| 2011 |
EI |
Yan-Chen Shin, Yi-Cheng Huang and Jen-Ai Chao, “Diagnosis of Ball Screw Preload Loss by Vibration Signals through the. Hilbert-Huang Transform and Multiscale Measure,” 2011 International Conference on Information Technology for Manufacturing Systems (ITMS 2011), Vol. 1, Shanghai, China, May 7-8, 2011. |
|
| 2010 |
EI |
Jun-Liang Chang, Jen-Ai Chao, Yi-Cheng Huang and Jen-Shyong Chen,“ Prognostic Experiment for Ball Screw Preload Loss of Machine Tool through the Hilbert-Huang Transform and Multiscale Entropy Method,” IEEE International Conference on Information and Automation, pp.376-380, June 20-23, Harbin, Heilongjiang, China, 2010 |
|
| 2010 |
2 |
Jun-Liang Chang, Jen-Ai Chao and Yi-Cheng Huang, “Ball Screw Preload Loss for Machine Tool by Acoustic Diagnosis Signals through the Hilbert-Huang Transform and Multiscale Entropy,” International Conference on Manufacturing and Systems, pp. 400-405, Dec. 16-18, Tainan, Taiwan, 2010. |
|
| 2010 |
EI |
Ming-You Ma, Jen-Ai Chao and Yi-Cheng Huang, “Improved Particle Swarm Optimization Approach of PID Controller Design for Machine Tool Positioning,” IEEE International Symposium on Computer, Communication, Control and Automation, pp.450-453, May 5-7, Tainan, Taiwan, 2010 |
|
| 2009 |
2 |
Yan-Bin Huang, Yu-Han Jian, Ming-You Ma and Yi-Cheng Huang, “Control of a Linear Synchronous Motor Using Adaptive Filter”, Proceedings of 2009 CACS International Automatic Control Conference National Taipei University of Technology, Taipei, Taiwan, Nov. 27-29, 2009. |
|
| 2009 |
EI |
Fu-Sheng Hsiao, Jen-Ai Chao, Yi-Cheng Huang, “3D Finite Element Analysis and Experiment on the Piezoelectric Ultrasonic Transducer Motion,” Proceeding of the 2009 IEEE International Conference on Mechatronics and Automation, pp. 158-163, Changchun, Jilin, China, August 9-12, 2009. |
|
| 2008 |
EI |
Yi-Cheng Huang, Jen-Ai Chao and Hsiang-Jung Lin, “Study on a PZT Actuator Based on Pre-stressed Mechanism,” Proceeding of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 722-727, Xian, China, July 2-5, 2008. |
|
| 2008 |
EI |
Yi-Cheng Huang, Kun-Yang Li and Chi-Hui Chen, “Experiment Study on Bonding Tool of Thermosonic Transducer for Flip-Chip Bonding,” Proceeding of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 1002-1007, Xian, China, July 2-5, 2008. |
| |
| 國內研討會論文 |
： |
| 2012 |
|
陳彧士,黃宜正, “利用振動量測訊號對中空滾珠導螺桿之預拉特性的診斷分析”, 第二十屆中華民國振動與噪音工程學術研討會, 大葉大學, 16 June, 2012. |
|
| 2012 |
|
丁冠彰, 黃宜正“壓電超音波變幅桿設計與模擬分析”, 第二十屆中華民國振動與噪音工程學術研討會, 大葉大學, 16 June, 2012. |
|
| 2012 |
|
陳建宏, 黃宜正, “利用粒子群最佳演算法設計探討具重覆性回授控制系統之收斂速度與循跡誤差”, 2012 National Symposium on System Science and Engineering, Decision and Control system, P0804, National Taiwan Ocean University, Keelung, 16~17 June, 2012. |
|
| 2011 |
|
錢信諺,黃宜正, “利用聲紋診斷滾珠導螺桿預壓力失效”，第十九屆全國振動與噪音學術研討會, 大葉大學， pp.12-20, 6/25，2011. |
|
| 2011 |
|
陳彧士,黃東藝,黃宜正,陳泰成,“雙胃式除油煙機內部腔體噪音與本體減振設計之研究,”綠能科技產業創新研發論壇暨中科院科專產學研期末論文發表研討會，No. 4, pp.24-36, Nov. 23, 桃園縣政府, 2011. |
|
| 2011 |
|
徐政斌,羅冠傑,黃宜正“壓電顯微切割系統之研製”, 中國機械工程學會第二十八屆全國學術研討會, 新興科技與其他, E08-012, 國立中興大學,12/10-11/2011. |
|
| 2011 |
|
陳宛羚,葉冠伶,林俊賢,黃宜正“利用經驗模態與黃鍔轉換探討耳脈搏訊號與心電圖訊息之比較”,中國機械工程學會第二十八屆全國學術研討會, 新興科技與其他, E07-031, 國立中興大學,12/10-11/2011. |
|
| 2011 |
|
錢信諺,趙仁愛,徐政斌,黃宜正,“以聲紋診斷滾珠導螺桿預壓力之特性研究”,中國機械工程學會第二十八屆全國學術研討會, 動力與控制, B10-013, 國立中興大學,12/10-11/2011. |
|
| 2011 |
|
王信能,黃宜正,“桌上型工具機切削動態特性分析”中國機械工程學會第二十八屆全國學術研討會, 動力與控制, B01-009, 國立中興大學,12/10-11/2011. |
|
| 2010 |
|
?英彬, 黃宜正, “具熱源式壓電超音波馬達載具之溫?伺服控制”, 2010 ISC智慧型系統工程應用研討會，遠東科技大學，5/6/2010. |
|
| 2010 |
|
陳兆宏,黃宜正, “雙缸往?式空壓機之曲柄?桿機構動態特性分析與設計改善”, 精密機械與製造科技研討會，高苑科技大學，5/21-23/2010. |
|
| 2010 |
|
Chun-Liang Chiang, Yi-Cheng Huang and Jenq-Shyong Chen,"A Fabricated CNC High Speed Test Bed for Preload Loss Identification", 第十八屆全國自動化科技研討會, PP. 156, 6/25-26/2010 |
|
| 2009 |
|
孫偉哲, 黃宜正, “超音波振動子應用於覆晶接合製程之分析與量測”, 精密機械與製造科技研討會，高苑科技大學，5/23-24/2009. |
|
| 2009 |
|
Chi-Jen Chen, Yi-Cheng Huang, Chun-Ying Lee, “Modal Analysis a New Flexible Hinge Positioning Stage”, 精密機械與製造科技研討會，高苑科技大學，5/23-24/2009. |
|
| 2009 |
|
錢信諺,黃宜正,陳泰成,姚志宏, “恆溫閥腔內通道冷熱水混溫分析之研究,” COMSOL Conference, Taipei, 11/27, 2009. |
|
| 2009 |
|
黃彥賓, 黃宜正, “線性感應馬達之系統鑑別與運動控制模擬”, 精密機械與製造科技研討會，高苑科技大學，5/23-24/2009. |
|
| 2009 |
|
許慶緯, 黃宜正, “桌上型工具機之結構動態模擬”, 精密機械與製造科技研討會，高苑科技大學，5/23-24/2009. |
|
| 2008 |
|
黃宜正,李坤陽,陳奇暉,李峰佑，”壓電超音波頭之影響於熱超音波LED覆晶接合,”，精密機械與製造科技研討會論文集，高苑科技大學，5/23-25/2008 |
|
| 2008 |
|
黃宜正,陳奇暉,李坤陽,蕭富升”覆晶熱超音波LED 製程最佳化研究與破壞分析,”精密機械與製造科技研討會論文集，高苑科技大學，5/23-25/2008 |
|
| 2008 |
|
Yi-Cheng Huang, Fong-You Lee, Chi-Hui Chen, Kun-Yang Lee, " Dynamic Balancing Mass Design for the Crank of Reciprocating Compressor ",第十六屆全國振動與噪音學術研討會, 國立台北科技大學, 5/24/2008. |
| |
| 專利 |
： |
| 黃宜正, 錢信諺, 陳泰成, 姚志宏, “恆溫閥腔內通道冷熱水混溫分析之研究” ,申請發明, 2009/10/21創作人. |
|
| 黃宜正, 李峰佑, “空壓機之曲軸平衡配重設計成形方法及控制系統”，申請發明, 2008/11/ 創作人. |
|
| 黃宜正, “利用振動訊號、聲紋訊號診斷滾珠導螺桿預壓力失調之量測系統及其方法”, 發明專利, I465707, 2014/12/21，創作人. |
|
| 黃宜正, 姜俊良, 張俊良, “滾珠導螺桿預壓力失效診斷方法及其裝置” ,發明專利, I407026, 2013/09/01，創作人. |
|
| 梁朝雄, 黃宜正, “空調設備散熱或通風機組之廢能再生風力發電系統,” 新型 第 M 274454號, 2005/9/1, 創作人.[98年國家發明獎入決選作品] |
|
| 盧昭正, 黃宜正 “冷陰極管之高頻電源電路與保護裝置,” 發明專利, 第 I 239792號, 2005/9/11, 創作人. |
|
| 黃宜正, 羅慶璋, 張峻賓, 蔡銘玹, 吳衍嘉 “可調整握把角度之機械式結構,” 新型專利, No.0 90224689, 2003/5/12, 創作人. |
|
| 黃宜正, 王吉川 “可自由調整手把頃角之迷你車結構,” 新型專利, No. 090212484, 2002/06/21, 創作人. |
|
| 黃宜正, 謝世渠 “精密微動定位平臺,” 新型專利, No. 090202103, 2001/12/21, 創作人. |
|
| 黃宜正, 謝世渠 “精密微米制動器,” 新型專利, No. 089210400, 2001/11/21, 創作人. |
|
| 黃宜正, 王吉川 “具同時連動煞車線之自行車煞車握把結構,”新型專利, No. 089205191, 2001/10/21, 創作人. |
|
|
|
